Red ONE PET 1.75mm

• High quality PET 3D Printer filament
• 100% recycled content made from waste PET plastic bottles
• 100% recyclable cardboard spool and packaging
• 750g of material

• Description

  ONE PET 750g – Red 3D Printer Filament

  WASTESTREAM TO MAINSTREAM!

  ONE PET is a 100% recycled filament made from post-consumer PET plastic bottle waste. This is a stiff and tough material with excellent interlayer adhesion, available in a wide range of colours to suit needs and requirements.

  Where our regular PETg has a better impact resistance, ONE PET boasts superior technical properties such as tensile strength, elongation strain at break and tensile modulus.

  Please note: PET filaments such as ONE PET are inherently more hygroscopic than other materials – therefore please ensure you keep it dry. Should you need to dehydrate ONE PET we recommend oven-drying at 65° for 24 hours.

  Settings

  1.75mm settings (based on Prusa i3 MK 2)                                                         

  Extrusion Multiplier: 1.03

  Extrusion Width: 0.36

  Retraction Distance: 1mm

  Layer Height: 0.2

  Top Layers: 4

  Bottom Layers: 4

  Outline: 2

  Infill: 20%

  Internal Fill Pattern: Grid

  Extruder Temp.: 260°

  Heated bed: 70°

  Fan Speed: 0% (Top layers should have 100% of fan speed)

  Nozzle diameter: 0.4mm