Extruder

Capricorn Bowden Tubing XS Low Friction 1.75mm

Capricorn Bowden Tubing XS Low Friction 1.75mm

This is the original from Capricorn in USA, and not a china copy as many sells. Fore 1.75mm Fil..

13.75DKr Ex Tax: 11.00DKr

E3D Bearing ABEC 3 to Titan Aero Extruder

E3D Bearing ABEC 3 to Titan Aero Extruder

..

12.50DKr Ex Tax: 10.00DKr

E3D Bowden Clip 1.75mm filament

E3D Bowden Clip 1.75mm filament

Bowden tube coupler clips to remove any play in the coupler's retaining piece. They can help reduce ..

20.00DKr Ex Tax: 16.00DKr

E3D Compact but Powerful Motor

E3D Compact but Powerful Motor

This motor is lighter and shorter than a typical NEMA17 motor, however it produces almost as much to..

130.00DKr Ex Tax: 104.00DKr

E3D Hemera 1.75mm 12V Direct Kit

E3D Hemera 1.75mm 12V Direct Kit

 Dual-DriveFor E3D Hemera, we opted for a hardened stainless steel dual-drive arrangement which prov..

1,115.00DKr Ex Tax: 892.00DKr

E3D Hemera 1.75mm 24V Direct Kit

E3D Hemera 1.75mm 24V Direct Kit

 Dual-DriveFor E3D Hemera, we opted for a hardened stainless steel dual-drive arrangement which prov..

1,118.75DKr Ex Tax: 895.00DKr

E3D Hemera Bowdapter

E3D Hemera Bowdapter

This kit contains the following:1 x Bowden Adapter1 x Collet1 x Collet clip..

80.00DKr Ex Tax: 64.00DKr

E3D Hemera Bowden Kit

E3D Hemera Bowden Kit

..

862.50DKr Ex Tax: 690.00DKr

E3D Hemera Fan 24V with 1000mm Lead

E3D Hemera Fan 24V with 1000mm Lead

..

78.75DKr Ex Tax: 63.00DKr

E3D Hemera Fixings Kit

E3D Hemera Fixings Kit

This kit contains the following:5 x Square nuts4 x M3 socket head screws2 x Fan screws2 x M3 pan hea..

62.50DKr Ex Tax: 50.00DKr

E3D Hemera Heatbreak

E3D Hemera Heatbreak

A replacement E3D Hemera 1.75mm heatbreak. Although this heatbreak uses an M4 thread on the coldside..

116.00DKr Ex Tax: 92.80DKr

E3D Hemera Idler Kit

E3D Hemera Idler Kit

This kit contains:1 x Idler1 x Slide block1 x Spring block1 x Thumbwheel1 x M3 square nut1 x Idler s..

85.00DKr Ex Tax: 68.00DKr

E3D Hemera Replacement Drivetrain

E3D Hemera Replacement Drivetrain

A replacement drivetrain for older Hemera units (pre Jan 2021). Please note you will need to swap ou..

431.25DKr Ex Tax: 345.00DKr

E3D Hobb-Goblin - 8mm Hobbed Shaft Kit

E3D Hobb-Goblin - 8mm Hobbed Shaft Kit

This is the original, not a china copy. Hobb-Goblin - 8mm Hobbed Shaft KitA wicked little filament d..

87.50DKr Ex Tax: 70.00DKr

E3D Titan Aero (1.75mm 12V)

E3D Titan Aero (1.75mm 12V)

E3D Titan AeroE3D Titan Aero integrates the Titan extruder and V6 HotEnd into one neat little packag..

950.00DKr Ex Tax: 760.00DKr

Showing 1 to 15 of 35 (3 Pages)
Customer service
Payment options


Freight


-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

                                                                                                                                             Filament²3D © 2015 - 2021