Glow in the Dark Green PLA 1.75mm

0,75kg. Glow in the Dark Green kvalitet PLA 1,75mm fra FORMFUTURA.

Unique features

• Very easy to print

• • Warp-free printing and no deformation after cooling

  • Improved flowing behaviour and inter-layer adhesion

  • Good first layer adhesion to several (un)heated print surfaces

• Slightly softer than standard PLA resulting in improved strength and impact resistance

• Almost odourless processing/printing

• Biodegradable

• Wide variety of vivid opaque colors

General printing guidelines *

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Abrasiveness

Please be aware that Glow in the Dark filaments contain a relatively high concentration of extremely hard phosphorous particles, which have an abrasive nature. In general these phosphorous particles will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.