WOODJet Natur 500 g

WOODJet is a compound of PLA+ and sugar beet pulp.

• lower printing temperature 195 °C - great for bridging and printing overhangs
• higher adhesion of layers and impact toughness - ie. that the printed object is more flexible when bending
• pleasant 'woody' texture

STORY

This filament was created in cooperation with the Technical University of Liberec, and specifically the Institute for Nanomaterials and Advanced Technology and Innovation. The goal of this project was to utilize a secondary raw material of agricultural production and since we are a part of an agricultural cooperative, we did not need to import the secondary raw material (e.g. from abroad), but we get to used our own.

You can read how WOODJet came on our blog here.

PRINTING SETUP
Nozzle: 210 °C
Heatbed: 60 °C
We recommend a nozzle of 0.6 mm and larger.

ADVANTAGES:
✅ lower printing temperature 195 °C
✅ higher viscosity
✅ suitable for printing large models
✅ better withstands insufficient cooling of the printer in a warm environment
✅ tempting wooden look
✅ better post-processing

DISADVANTAGES:
❌ brittle
❌ low-temperature resistance
❌ we recommend a nozzle of 0.6 mm