StoneFil

StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone.
This high “stone filling” has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than “normal” PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish.

Available Colors etc.
Colors Concrete, Beton, RAL 7047, Granite, Granit, RAL 7045, Pottery Clay, Keramik ler, RAL 7006, Terracotta, RAL 2012,
Dimensions 1.75mm
Features Easy to print 50% gravimetric powdered stone filling ±37% heavier than “normal” PLA Matte and rough stone-like finish
General printing guidelines General printing guidelines * Nozzle size: ≥ 0.4mm Layer height: ≥ 0.2mm Flow rate: ± 110% Print temp: ± 215 - 230° C Print speed: High / Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. StoneFil has a very high filling with stone powders and therefore the filament can have a slightly more abrasive effect on brass nozzles than unfilled filaments.
Compliance Compliance * This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Write a review

Note: HTML is not translated!
    Bad           Good

StoneFil

  • Brand: FormFutura
  • Product Code: StoneFil
  • Availability: In Stock
  • 263,75DKr

  • Ex Tax: 211,00DKr

Available Options