• Your shopping cart is empty!

EasyFil PLA

EasyFil PLA is an easy to print PLA type of 3D printer filament that is available in a wide variety of colors. Its improved flowing behavior make 3D printed layers flow more into each other.

0.75 kg spool are in stock.

2.3kg spool approx. 3-5 days delivery.

EasyFil PLA is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. EasyFil PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make EasyFil PLA an extremely easy to print filament.


Unique features

  • Very easy to print

    • Warp-free printing and no deformation after cooling

    • Improved flowing behaviour and inter-layer adhesion

    • Good first layer adhesion to several (un)heated print surfaces

  • Slightly softer than standard PLA resulting in improved strength and impact resistance

  • Almost odourless processing/printing

  • Biodegradable

  • Wide variety of vivid opaque colors


General printing guidelines *

Nozzle size: ≥ 0.15mmLayer height: ≥ 0.1mmFlow rate: ± 100%
Print temp: ± 200 - 230° CPrint speed: MediumRetraction: Yes ± 5mm
Heat bed: ± 50 - 60° CFan speed: 50-100%Experience level: Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.



Available Colors etc.
Colors Black, sort, RAL 9017 Bronze, RAL 1036 Brown, Brun, RAL 8016 Dark Blue, Mørkeblå, RAL 5002 Dark Green, Mørkegrøn, RAL 6016 Gold, Guld, RAL 1032 Grey, Grå, RAL 7011 Light Blue, lyseblå, RAL 5015 Light Green, lysegrøn, RAL 6018 Light Grey, Lysegrå, RAL 7035 Luminous Yellow, Lysende Gul, RAL 1026 Magenta, RAL 4010 Natural, RAL 9010 Orange, RAL 2008 Red, Rød, RAL 3020 Sapphire Grey, Safirgrå, RAL 5014 Silver, Sølv, RAL 9006 White, Hvid, RAL 9016 Yellow, Gul, RAL 1023
Dimensions 1.75mm
Features Very easy to print Warp-free printing and no deformation after cooling Improved flowing behaviour and inter-layer adhesion Good first layer adhesion to several (un)heated print surfaces Slightly softer than standard PLA resulting in improved strength and impact resistance Almost odourless processing/printing Biodegradable Wide variety of vivid opaque colors
General printing guidelines General printing guidelines * Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 50 - 60° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Compliance This filament is compliant to below listed directives and regulations. RoHS directive 2011/65/EC REACH directive 1907/2006/EC *) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products

Write a review

Note: HTML is not translated!
    Bad           Good

EasyFil PLA

  • Brand: FormFutura
  • Product Code: EasyFil PLA 1.75mm
  • Availability: In Stock

  • 230,00DKr

  • Ex Tax: 184,00DKr

Available Options


0 reviews / Write a review