• CREALITY ENDER-5 S1

Speedy to Realize Creative Ideas

Upgraded motion system for 2000mm/s² acceleration and up to 250mm/s (5 times) printing speed*. Each X/Y/Z axis is driven by a high-precision stepper motor. A steel transmission shaft to connect and sync the two Y-axis belts. High-torque Y-axis 42-48 motor for responsive and precise motion.

Higher Efficiency and More Eco-friendly

It slashes printing time for all types of models. Higher efficiency and less power consumption.

Stand Firmly to Print Quality Models

An all-metal cube frame goes with the classic Cartesian structure. The stability is enhanced by thick linear shafts, extra gussets, two cantilevers, and silicone bed mounts.

Higher Success Rate

100% success rate for 1,000-hour printing at 250mm/s high speed and 0.2mm layer height.

Direct Extrusion Adapted to Flexible Filaments

The all-metal "Sprite" direct extruder features dual gears of a 1:3.5 gear ratio. It delivers a powerful and uniform 80N extrusion force. Way better when printing with flexible filaments like TPU.

Hotend Upgrade for High-temp Printing

Titanium Alloy Heatbreak: Low thermal conductivity for blocking heat creep. Able to tame up to 300℃. Corrugated Heatsink: 2.5 times surface area that is rapidly air-cooled by a silent axial flow fan. Large Melting Chamber: 50mm³ melting chamber surrounded by a large 4000mm³ heater block.

Get a Cool Model Promptly

The special "Urus" air ducts channel the strong wind generated by a large 5015 fan to cool the freshly printed section directly. The deposited hot material will harden and bond up immediately, thus less drooping or warping caused by overheating. It gives better overhangs, bridges, and more details overall.

Explore with High-temp Filaments

A whole new world opens, as a variety of heat-resistant engineering plastic filaments are brought into the game. Regular Filaments: PLA, PETG, TPU High-temp filaments*: ABS, PC, ASA, HIPS

Quicker Expert-Level Calibration

Level the bed quickly by CR Touch auto-leveling and auxiliary leveling, or offset the Z-axis height at 0.01mm accuracy. Get the perfect first layer with less hassle.

Straightforward Touch Screen UI

4.3-inch touch screen featuring a wide viewing angle, sensitive response, and a tabbed user interface. A temperature PID control page is also added for easy adjustment.

Sticky and Bendable PC Build Surface

The PC spring steel sheet has two notches and a magnetic base for quick installation. The frosted PC surface is sticky to models. After printing, the model can be removed right away with a slight bend.

Electrical Safety and Reliability

Secure aviation connector. Encased 350W power adapter. And no more loose wires and cables with the nylon wire harness sleeve. All for safety and tidiness

Construction an Technical Details 
Usable Filament Diameter1.75 mm
Max Nozzle Temperature300 ºC
Open Filament SystemYes
Extruder TypeDirect drive
Recommended Printing Speed Max250 mm/s (
Build Area220 mm x 220 mm x 280 mm
Build Plate Temp Max110 ºC
Build Plate MaterialFlexible Steel Plate
Build Plate Leveling SystemAutomatic - CRTouch
Build Chamber During ProcessOpen
Extruder Number Of1
Installation Space / Requirements 
Total Mass Overall Dimensions425 mm x 460 mm x 570 mm
Total Weight12.2 kg
Max Power Consumption350 W
VoltageAC: 100 V / 240 V (50-60 Hz)
Equipment 
Hepa FilterNo
Filament Runout SensorYes
Power Loss Fail SafeYes
Touch ScreenYes
Connection 
SD CardYes
USB PortYes
Accuracy 
Layer Height0.05 - 0.35 mm
Resolution0.1 mm
Shipping 
Shipping Box528 mm x 474 mm x 340 mm
Shipping Weight14.7 kg

Write a review

Note: HTML is not translated!
    Bad           Good

CREALITY ENDER-5 S1

  • Product Code: CREALITY ENDER-5 S1
  • Availability: Extern Stock 2-5 day
  • 3,674.00DKr

  • Ex Tax: 2,939.20DKr