• Spectrum LCD Color Mix - Water Washable Resin

Spectrum LCD Color Mix - Water Washable Resin

Our Spectrum LCD Color Mix - Water Washable Resin is a high-quality 3D printing resin. This material offers excellent printability and cleaning properties. Using this resin allows you to clean prints by simply using water. Furthermore, the ingenuous color mixing concept of our Spectrum resins resulted in an impressive amount of 29 RAL colors that can be obtained by adding our Spectrum Color Pigments to the resin. You can even fine-tune your own colors by mixing pigments into a new color. 

Important key features:

  • Clean prints by simply using water.

  • Very safe, simple and fast removal process of uncured resin.

  • Available in an impressive range of 29 opaque RAL colors.

  • Good compatibility with all SLA, DLP and LCD / MSLA 3D printers in the range of 385 – 420nm.

Suitable applications

  • Suitable for the production of figurines, miniatures and models.

  • Suitable for 3D printing functional prototypes.

  • Suitable for 3D printing end-use products.

    Print Settings
    The print settings below are for the resin without any pigments added, please see the Spectrum Pigment Page for all settings for all colors.


    Phrozen Sonic Mini 4K

    50µm
    First / Burn-in Layers: 4x to 6x for 40 Seconds
    Normal Layers: 4 to 5 Seconds

    Anycubic Photon

    50µm
    First / Burn-in Layers: 4x to 6x for 55 to 65 Seconds
    Normal Layers: 11 to 13 Seconds
    Light-off Delay: 1
    Bottom Light-off Delay: 1

    Anycubic Photon Mono SE

    50µm
    First / Burn-in Layers: 4x to 6x for 40 to 45 Seconds
    Normal Layers: 4 to 5 Seconds
    Lifting Distance: 6mm
    Light-off Delay: 0.5
    Bottom Light-off Delay: 1

    Anycubic Photon Mono X 

    50µm
    First / Burn-in Layers: 4x to 6x for 45 Seconds
    Normal Layers: 4 to 4.5 Seconds
    Lifting Distance: 8mm
    Light-off Delay: 1
    Bottom Light-off Delay: 1
    UV Power: 80%

    Elegoo Mars 2 Pro  

    50µm
    First / Burn-in Layers: 4x to 6x for 45 Seconds
    Normal Layers: 4.5 to 5 Seconds
    Lifting Distance: 6mm
    Light-off Delay: 0.5
    Bottom Light-off Delay: 1

    *If you need the best settings for your 3d printer we highly recommend using the included RERF (Resin Exposure Range Finder) or Resin Exposure Calibration Tool.
    This is most likely included with the 3d printer usb stick and or manual.

Skriv en bedømmelse

Bemærk: HTML bliver ikke oversat!
    Dårlig           God

Spectrum LCD Color Mix - Water Washable Resin

  • Mærke: FormFutura
  • Produktkode: Spectrum LCD Color Mix - Water Washable Resin
  • Lager status: På lager
  • 446,25DKr

  • Eksl. Moms: 357,00DKr