PA + 15CF 1,75mm
The PA + 15CF filament from ROSA3D is a combination of nylon and carbon fibers. The combination of the advantages of these two raw materials results in a product with extraordinary strength properties.
Prints made of PA + 15CF filament have the ability to work continuously at temperatures over 160°C.
PA + 15CF printouts can be successfully used as a replacement for steel elements in order to reduce the weight of the device or structure.
The PA + 15CF filament is easy to print and, thanks to the filling with carbon fiber, has a low processing shrinkage.
Recommended especially for semi-professionals and advanced users.
When printing with PA + 15CF, hardened steel nozzles are recommended (brass and aluminum nozzles are subject to abrasion), suggested nozzle size> 0.3 mm.
Recommended printing temperature 250-290 °C.
Recommended bed temperature: 100-120°C
TECHNICAL PARAMETERS PA + 15CF
Diameter (mm): 1.75 mm
Diameter tolerances (mm): +/- 0.05 mm
Ovality tolerance (mm): +/- 0.02 mm
Weight (g): 500 g (vacuum packed with a desiccant)
Printing temperature (° C): 250-290 ° C
Bed temperature (° C): 100-120 ° C
PHYSICAL PARAMETERS PA + 15CF
Density: 1.05 g / cm3
Odor: odorless
Charpy impact strength:
No notch - 55 kJ / m2 (ISO 179-1eU)
Notched - 15 kJ / m2 (ISO 179-1eA)
Tensile elongation (speed 5 mm / min, to break): 7% (ISO 527)
Tensile strength (speed 5 mm / min, to break): 50 MPa (ISO 527)
Tensile modulus of elasticity (speed 1 mm / min): 3650 MPa (ISO 527)
Vicat softening point: 168 ° C (ISO 306)
PA + 15CF 1,75mm
- Mærke: ROSA 3D Filament
- Produktkode: PA + 15CF
- Lager status: På lager
-
299,00DKr
- Eksl. Moms: 239,20DKr