WOOD 1,75mm : Wood Mørk Kork 1.75mm

Wood Mørk Kork 1,75mm

0,5kg. Kvalitet Wood Mørk Kork 1,75mm PLA/PHA med korkfiber i. Fra FORMFUTURA.

EasyCork is a lightweight cork-filled PLA-based filament which is gravimetrically filled with approximately 30% cork fibres. The gravimetric filling with relatively lightweight cork fibres means that EasyCork has extremely high volumetric cork filling properties, allowing you to 3D print beautiful objects with great cork-like aesthetics and cork-like properties such as being lightweight and impact resistant.
EasyCork is a very easy to print material as it is based on our EasyFil PLA compound and the 30% gravimetrical filling with cork fibres make the filament absolutely warp-free.


Unique features

  • High cork filling

    • Real cork feel, look and smell

  • Very easy to print

    • Warp-free printing

    • Great thermal stability and filament flowing behaviour

    • Perfect first- and inter-layer adhesion

    • Can be printed at high printing speeds

  • Lightweight and impact resistant


General printing guidelines *

Nozzle size: ≥ 0.4mmLayer height: ≥ 0.25mmFlow rate: ± 100%
Print temp: ± 210 - 260° CPrint speed: HighRetraction: Yes ± 5mm
Heat bed: ± 0 - 60° CFan speed: 50-100%Experience level: Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Nozzle cleaning

When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.


Product export information

HS Code: 39169090Description: MonofilamentCountry of origin: the Netherlands


Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC

  • REACH directive 1907/2006/EC

EasyWood - MSDS - English (217.62 KB) Download
EasyWood - TDS - Formfutura (108.48 KB) Download
General Print Settings - Formfutura (117.65 KB) Download

Skriv en bedømmelse

Bemærk: HTML bliver ikke oversat!
    Dårlig           God

Wood Mørk Kork 1,75mm

  • Mærke: FORMFUTURA
  • Model nummer: Wood 1.75mm
  • På lager.
  • 245,00DKr

  • Eksl. Moms: 196,00DKr

Relaterede produkter

Wood Lys Kork 1,75mm

Wood Lys Kork 1,75mm

0,5kg. Kvalitet Wood Lys Kork 1,75mm PLA/PHA med korkfiber i. Fra FORMFUTURA.EasyCork is a lightweig..

245,00DKr Eksl. Moms: 196,00DKr

Ancient Bronze 1,75mm

Ancient Bronze 1,75mm

Bemærke 1.5kg spoler kan der være op til 5 hverdage levering på. Der vil blive sendt en ma..

262,50DKr Eksl. Moms: 210,00DKr

Classic Copper 1,75mm

Classic Copper 1,75mm

Bemærke 1,5kg spoler kan der være op til 5 hverdage levering på. Der vil blive sendt en ma..

262,50DKr Eksl. Moms: 210,00DKr

ClearScent Transparent mørke blå ABS 1,75mm

ClearScent Transparent mørke blå ABS 1,75mm

0,75kg. ClearScent Transparent mørke blå kvalitet ABS 1,75mm fra FormFutura.Imagine a transparent an..

242,00DKr Eksl. Moms: 193,60DKr

Wood Lys Kork 2,85mm

Wood Lys Kork 2,85mm

0,5kg. Kvalitet Wood Lys Kork 2,85mm PLA/PHA med korkfiber i. Fra FORMFUTURA.EasyCork™ is a lightwei..

245,00DKr Eksl. Moms: 196,00DKr

Wood Mørk Kork 2,85mm

Wood Mørk Kork 2,85mm

0,5kg. Kvalitet Wood Mørk Kork 2,85mm PLA/PHA med korkfiber i. Fra FORMFUTURA.EasyCork™ is a lightwe..

245,00DKr Eksl. Moms: 196,00DKr

StoneFil Terracotta 1,75mm

StoneFil Terracotta 1,75mm

StoneFilStoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PL..

245,00DKr Eksl. Moms: 196,00DKr

StoneFil Granite 1,75mm

StoneFil Granite 1,75mm

StoneFilStoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PL..

245,00DKr Eksl. Moms: 196,00DKr

StoneFil Pottery Clay 1,75mm

StoneFil Pottery Clay 1,75mm

StoneFilStoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PL..

245,00DKr Eksl. Moms: 196,00DKr

StoneFil Concrete 1,75mm

StoneFil Concrete 1,75mm

StoneFilPrintet og fotograferet af Jonas Markussenhttps://www.thingiverse.com/thing:257911https..

245,00DKr Eksl. Moms: 196,00DKr

Tags: wood, 1.75mm, 175mm, mørk kork mørk, kork, 1, 75mm