Besides its transparency and odourless processing features ClearScent ABS is nearly warp-free, has an excellent thermal stability and its 3D printing flowing behaviour is fine-tuned for optimal 3D printing results.
Transparent ABS filament
90% light transmittance with 2.2% haze
Nearly odourless processing / printing
No unpleasant ABS smell
Very easy to print
Warp-free printing and no deformation after cooling
Improved flowing behaviour and inter-layer adhesion
Good first layer adhesion to several heated print surfaces
Good chemical resistance
Post-processing with Acetone , TetraHydroFuran (THF) and other Analogous Solvents
General printing guidelines *
|Nozzle size: ≥ 0.15mm||Layer height: ≥ 0.1mm||Flow rate: ± 100%|
|Print temp: ± 220 - 260° C||Print speed: Medium||Retraction: Yes ± 5mm|
|Heat bed: ± 90 - 100° C||Fan speed: 0-25%||Experience level: Beginner|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
|ρ: 106 g/cc||50 gr coil||0.75 Kg spool|
|Ø 1.75mm||± 19.6m||± 196m|
|Ø 2.85mm||± 7.4m||± 74m|
Product export information
|HS Code: 39169090||Description: Monofilament||Country of origin: the Netherlands|
This filament is compliant to below listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.