Delta : Duet3D Smart Effector for delta printers without ...

Duet3D Smart Effector for delta printers without mag ball


Smart Effector

The Smart Effector for delta printers allows the hotend to be used as a Z probe giving fantastic accuracy across the whole delta build area by eliminating the effect of tilt. It uses precision PCB manufacturing to ensure equal hole spacing between the effector and the carriages on the towers, further improving accuracy.

Compatible with Haydn Huntley’s Magball delta arms. 
We have 360mm arms and ball-studs as a separate listing

 

  • Supplied with a custom machined e3d v6 heatsink (produced by e3d on our behalf).
  • Supplied with 3 PCB carriage adapters with 20mm mounting hole spacing compatible with common linear rails and wheel carriages.
  • We have 360mm arms and ball-studs as a separate listing – they are not included. Various other lengths of arms are available from Haydn directly or other suppliers.
  • We list sets of 6 spare mag balls if you want to have multiple smart effectors for a quick swap.
  • The smart effector simplifies wiring of hotend components with plug connectors from thermistor and fans along with a screw terminal for the heater cartridge. Molex and microfit connections are then used for wiring looms back to the control electronics. Crimp pins and housings are supplied for all connections
  • Optionally a genuine e3d V6 kit with PT100 or thermistor can be added, not including the heatsink as that is supplied as standard. (24V available by default)
  • On board LEDs for print illumination are compatible with either 12V or 24V power supplies with a jumper selecting the voltage.

More detail is available in the documentation.


"UK customers should buy from duet3d.com".

Skriv en bedømmelse

Bemærk: HTML bliver ikke oversat!
    Dårlig           God

Duet3D Smart Effector for delta printers without mag ball

  • Mærke: Duet3D
  • Model nummer: Duet3D Smart Effector for delta printers without mag ball
  • På lager.
  • 487,50DKr

  • Eksl. Moms: 390,00DKr

Relaterede produkter

Duet 2 wifi board

Duet 2 wifi board

WiFi and Silence Duet 2 Wifi V1.04The DuetWifi is an advanced 32 bit electronics for the contro..

1.325,00DKr Eksl. Moms: 1.060,00DKr

Duex5

Duex5

Duex5The Duex5 has the following features:5 additional TMC2660 stepper motor drivers with stall noti..

968,75DKr Eksl. Moms: 775,00DKr

E3D PT100 Føler

E3D PT100 Føler

PT100's are  high temperature, high accuracy temperature sensors that you can now use on your E..

156,25DKr Eksl. Moms: 125,00DKr

Duet3D Type K Thermocouples Daughterboard

Duet3D Type K Thermocouples Daughterboard

Type K Thermocouple Daughter BoardThis is a daughterboard specifically designed for the DuetWif..

310,00DKr Eksl. Moms: 248,00DKr

Duet3D sikring 250mA

Duet3D sikring 250mA

VSSA fuseIf you get a short in your wiring between your heater or fan wiring and the VSSA side of a ..

12,50DKr Eksl. Moms: 10,00DKr

E3D Type K Thermocouple

E3D Type K Thermocouple

These new Type-K Thermocouples come in a neat little 3mm x 15mm cylindrical package for compatibilit..

120,00DKr Eksl. Moms: 96,00DKr

Duet3D sikring 1A

Duet3D sikring 1A

Blade fusesPCB revisions 1.03 and later have a 1A mini auto blade fuse protecting the fan circuits w..

4,00DKr Eksl. Moms: 3,20DKr

Duet3D sikring 2A

Duet3D sikring 2A

Blade fuses2A mini auto blade fuse protecting the fan, air pimps etc. circuits.You can increase the ..

4,00DKr Eksl. Moms: 3,20DKr

Duet3D sikring 3A

Duet3D sikring 3A

Blade fuses3A mini auto blade fuse protecting the fan, air pimps etc. circuits.You can increase the ..

4,00DKr Eksl. Moms: 3,20DKr

Duet3D sikring 7.5A

Duet3D sikring 7.5A

Blade fuses7,5A mini auto blade fuse for everything else than Fan circuits and Bed heater on PCB rev..

4,00DKr Eksl. Moms: 3,20DKr

Duet3D sikring 15A

Duet3D sikring 15A

Blade fuses15A mini auto blade fuse for Bed heater circuit on PCB revision 1.04 "UK customers s..

4,00DKr Eksl. Moms: 3,20DKr

Tags: duet3d, smart, effector, for, delta, printers, elektronik without, mag, ball